One tow four high pressure ion generator installation and maintenance

Product Description

The voltages are 4.6 KV, 5.6KV and 7.0KV respectively.

It can provide 2/4 groups of high voltage power output for ion air gun, ion air nozzle, ion air snake, ion air rod, etc.;

The electrostatic eliminator can be conveniently connected according to the identification and installation instructions;

Stickon high voltage power supply has short circuit protection function, which is safe and convenient.

Product Features

1. Low power consumption and high energy

2. Work with high voltage and low current

3. Safety, reliability and excellent performance

4. Convenient operation and strong environmental applicability

5. Plug-in interface, easy to install

6. With energy limiting element to ensure stable output

One-to-Four Series:

Product Parameter

One-to-Four Series Appearance Dimensions

Installation instructions and maintenance

How to maintain:

1. If the indicator light on the panel of a power box is off, stop using it and repair it by special maintenance personnel.

Before using the power box, ensure that it works properly

2, it is recommended to replace the parts regularly, so as not to burn the high voltage generator. The parts to be replaced are high-pressure export ports (plastic

Materials and parts), so the parts are prone to aging when working in high voltage environment for a long time, so timely inspection is recommended

And replace.

3. Infrared thermometer is used to test whether the high temperature is present at the outer face of the high-pressure generator. If so, the use shall be stopped

Avoid adverse effects on other parts, such as aging and falling off of plastic fixtures.

Instructions for operation:

1. How to check whether parts need to be replaced -- daily check

(1) Twist the high-pressure plastic port by hand to see if it is loose (do not exert too much force)

Check whether the high-pressure plastic port is charred

▲ Note that the burned part is inside the power supply, so the method of checking is:

1. Smell and hear burning

2. There is no reaction after the power supply is plugged in

▲ If the high pressure plastic port is found to be loose or burnt, stop using it immediately and inform the supplier to replace parts.

Do not remove it without permission

How to use infrared thermometer to test whether there is high temperature phenomenon in the high voltage generator shell

▲ Must be off the power for 10 minutes after operation.

▲ After cleaning, you must wait for alcohol to volatilize completely, and then power on the work, can not use any other organic solvents to clean the bar body.

Matters needing attention

1. The working input power (220V AC) of a power box must be connected to a reliable grounding terminal.

   
   

2. The ground wire of the ion air nozzle, air gun and wind rod must be connected with the ground end of the power box reliably to ensure the user's

Security.

3. The device should not be used in rain or wet environment

4. It is strictly forbidden to use the equipment in inflammable and explosive environment

5. It is strictly forbidden to disassemble products without authorization. Internal maintenance and repair must be carried out by professionals

6, check or replace the product, must turn off the power, otherwise may cause electric shock or fire.

7, specially designed for the removal of static electricity, no other use, any abnormal use may cause machine failure, electric shock,

Fire and other hidden dangers.

8, before the product is powered on, please check the power supply specifications, any power supply that does not meet the specifications will cause damage to the product

Even the fault